ZENITH 5Z42

ZENITH 5Z42

ZENITH 5Z42

The Zenith 5Z42 thanks to the boom in 5 sections completely with "Z" folding type is the best choice for medium-big jobsites as residential and industrial buildings, bridges/under bridges, and pumping in depth as excavations and foundations. The Zenith 5Z42 has a minimum boom opening of 8.0 m and pipeline Ø 125 mm, so ideal solution for urban jobsites of difficult access thanks to the front stabilization "X" type. Perfect assembly on truck 4 axles of wheelbase 4.850 - 5.450 mm
The pumping group S8 at open hydraulic circuit has high reliability; three typologies of pumping groups from 130 m³/h to 185 m³/h concrete output and pressures till to 76 bar.

ZENITH 5Z42
ZENITH 5Z42

Main features

  • Pump made by high-yield tensile strength steel, FEM designed.
  • Assembly on 4 axles chassis.
  • Total mass on ground < 32 t.
  • Front outriggers "X" opening; rear outriggers "swing-out" opening. Separated operation controls on both side of the equipment. Position held by hydraulic check valves.
  • Boom 5 sections "Z" folding type, pipeline Ø 125 mm (5").
  • Boom control by proportional distributor.
  • Boom minimum opening height 8.000 mm.
  • Valve S8 at high performances till 185 m³/h: continuous, silent, regular pumping.
  • Concrete capacity adjuster at distance.

Standard dotation

  • Proportional radio remote control provided with double speed in boom moving, automatic free frequency research, manipulators with 8 positions and delivery capacity converter.
  • Membrane water pump 75 l/min, 30 bar.
  • Electric vibrator on hopper grid and push-button control panel at distance.
  • Plates for outrigger support and housing with safety lock.
  • Light projector on hopper.
  • Tool kit for cleaning and maintenance.

 

Download Scheda

Specifications subject to change without prior notice, no responsibility is taken for the correctness of this information.

pie