ZENITH 4Z38

ZENITH 4Z38

ZENITH 4Z38

The new concrete pump Zenith 4Z38 renews the boom 4 sections with "Z" folding type and it's the perfect suitable solution for jobsites of medium-small dimension: civil and industrial works, pumping in depth (excavations, underground parking and foundations). The Zenith 4Z38 has a minimum boom opening of 8.8 m only and pipeline Ø 125 mm so ideal solution for urban jobsites of difficult access thanks to front stabilization "X" type. The pump can be easily maneuvered thanks to the perfect assembly on truck 3 axles of wheelbase 4.500 - 4.600 mm.
The pumping group S8 at open hydraulic circuit has high reliability; three typologies of pumping groups from 130 m³/h to 185 m³/h concrete output and pressures till to 76 bar.

ZENITH 4Z38
ZENITH 4Z38

Main features

  • Pump made by high-yield tensile strength steel, FEM designed.
  • Assembly on 3 axles chassis.
  • Total mass on ground < 26 t.
  • Front outriggers "X" open; rear outriggers "swing-out" open. Separated operation controls on both side of the equipment. Position held by hydraulic check valves.
  • Boom 4 sections, "Z" folding type, pipeline Ø 125 mm (5").
  • Boom control by proportional distributor.
  • Boom minimum opening height 8.800 mm.
  • Valve S8 at high performances till 185 m³/h: continuous, silent, regular pumping.
  • Concrete capacity adjuster at distance.

Standard dotation

  • Proportional radio remote control provided with double speed in boom moving, automatic free frequency research, manipulators with 8 positions and delivery capacity converter.
  • Membrane water pump 75 l/min, 30 bar.
  • Electric vibrator on hopper grid and push-button control panel at distance.
  • Plates for outrigger support and housing with safety lock.
  • Light projector on hopper.
  • Tool kit for cleaning and maintenance.

Download Scheda

Specifications subject to change without prior notice, no responsibility is taken for the correctness of this information.

pie